Ultrasonic Testing Equipment
ISTINST provides ultrasonic testing equipment for concrete and structural NDT, including ultrasonic pulse velocity (UPV), pulse-echo, and ultrasonic tomography systems. These technologies support inspection of bridges, tunnels, buildings, foundations, and other concrete structures for internal defects, cracks, voids, delamination, honeycombing, and grouting conditions.
All Ultrasonic Testing Equipment
ISTINST provides a comprehensive range of ultrasonic testing equipment for civil engineering and non-destructive testing (NDT).
- Filter by Testing Method
Ultrasonic Pulse Velocity Test (UPVT)
Free vs Paid WordPress Plugins: Which Should You Choose?Free vs Paid WordPress Plugins: Which Should You Choose?Free vs Paid WordPress...
Ultrasonic Pulse Velocity Test (UPVT)
Detection of the quality of backfill grouting behind shield tunnel segment walls; positioning of segments; defects such as voids, delamination,...
Ultrasonic Pulse Velocity Test (UPVT)
Explore professional civil engineering NDT equipment and structural health monitoring instruments from ISTINST. Reliable non-destructive testing hardware solutions. Request a...
Phased Array Ultrasonic Testing (PAUT)
A1040 MIRA 3D Pro modular upgrade and MATRIX mode breakA1040 MIRA 3D Pro modular upgrade and MATRIX mode break...
It is suitable for visual damage detection of cables in cable-stayed bridges and suspensionbridges. lt automatically adapts to cable diameters...
Find the Right Ultrasonic Testing Equipment for Your Application
Select the optimal non-destructive testing (NDT) method below to explore our high-precision ultrasonic tomography systems, flaw detectors, and thickness gauges designed for concrete, welds, and metallic structures
| Testing Method | Primary Capability | Typical Inspection Use / Defects | Related Equipment |
|---|---|---|---|
| Ultrasonic Pulse-Echo (UPE) | Under single-end access conditions, internal reflection signals are captured using transmit/receive transducer arrays, and B-scan or 3D tomographic images are reconstructed using algorithms such as SAFT. | Holes/voids, delamination, cracks, voids behind reinforcing bars, grouting defects in prestressing ducts, tunnel lining thickness; suitable for bridge decks, tunnel linings, foundation slabs, and other structures accessible from only one side | Explore UPE Equipment → |
| Ultrasonic Pulse Velocity Test (UPVT) | By measuring the propagation time (µs) of ultrasonic waves through concrete and calculating the wave velocity (m/s), it is possible to assess the concrete’s modulus of elasticity, density, and uniformity, enabling rapid surveys of large-scale structures. | Evaluation of concrete uniformity; strength estimation (requires establishing a wave velocity–strength correlation curve); assessment of porosity and crack severity; monitoring of structural aging. In transmission mode, the extent of voids, honeycombing, and segregation can be determined. | Explore UPVT Equipment → |
| Phased Array Ultrasonic Testing (PAUT) | Uses multiple transducer elements with electronically controlled beam steering and focusing for multi-angle inspection. Supports encoded scanning and digital imaging, including sectorial scans and other views depending on the system. | Weld inspection, including complex and thick-walled welds; cracks, lack of fusion, incomplete penetration, inclusions and laminations; corrosion mapping and inspection of selected composite materials | Explore PAUT Equipment → |
| Conventional Ultrasonic Testing (UT) | Typically uses single-element contact or immersion probes in pulse-echo mode. A-scan signals support flaw localization, calibrated indication evaluation and thickness measurement | Inspection of welds, forgings, castings, plates, bars, pipes and pressure vessels; detection of cracks, inclusions, laminations and other internal discontinuities. Corrosion thickness measurement is also possible with suitable equipment and procedures | Explore Conventional UT Equipment → |
| Electromagnetic Acoustic Transducer (EMAT) | Generates and receives ultrasonic waves through electromagnetic interaction in electrically conductive materials, generally without couplant. Depending on the configuration, it can inspect hot, moving or rough-surfaced components and generate selected shear, Lamb or guided-wave modes | EMAT enables non-contact ultrasonic testing of conductive metals without couplant, even on hot, moving, rough, or coated surfaces. Typical applications include high-temperature pipe thickness monitoring, pipeline corrosion screening, hot-rolled steel inspection, surface and near-surface defect detection, and multi-parameter measurement. | Explore EMAT Testing Equipment → |
Ultrasonic Inspection Equipment Applications
Browse applications across concrete structures and industrial inspection. Choose equipment according to the material, inspection objective and site conditions
| Engineering Application | Typical Information Need | Relevant Method / Equipment | Related Solution |
|---|---|---|---|
| Bridge Concrete Inspection | Ultrasonic inspection can support investigation of concrete condition, internal anomalies, cracks, voids, and other structural irregularities in bridge components. | Bridge concrete inspection | |
| Tunnel Lining Inspection | Ultrasonic testing can be used to investigate tunnel lining thickness, internal anomalies, voids, delamination, and grouting-related conditions. | ||
| Building & Concrete Structure Inspection | Ultrasonic testing supports non-destructive assessment of concrete members in buildings and other structures where internal condition needs to be evaluated without destructive sampling. | ||
| Foundation & Pile Assessment | Ultrasonic methods can assist in investigating selected foundation and pile-related concrete conditions, including anomalies and defects where the selected testing configuration is appropriate. | ||
| Grouting & Precast Concrete Inspection | Ultrasonic inspection can support investigation of grouting quality, internal voids, interfaces, and selected defects in precast and assembled concrete structures. |
Standards & References for Concrete Ultrasonic Testing
Key Chinese and International Standards for Ultrasonic Testing of Concrete Structures
Chinese Standards
International Standards
T/CECS 21-2024
Technical specification for inspection of concrete defectsby ultrasonic method
Ultrasonic inspection of concrete defects, including internal voids, poorly compacted areas, crack depth, interfaces, surface damage, pile defects, and prefabricated concrete connections; also incorporates array ultrasonic imaging
ISO 1920-7:2004
Testing of Concrete - Part 7：Non-destructive tests on hardened concrete
For assembled residential buildings, including ultrasonic detection of concrete defects, crack depth, and selected prefabricated concrete connection and grouting defects
GB/T 50784-2013
Technical standard for in-situ inspection of concrete structure - Part 7: Detection of Defects in Concrete Members
Provides the in-situ inspection framework for concrete structures; its Chapter 7 uses ultrasonic testing for internal concrete defects and crack-depth detection
EN12504-4:2021
Testing Concrete in Structures - Part 4：Determination of ultrasonic pulse velocity
Defines ultrasonic pulse velocity testing of hardened concrete using longitudinal or transverse waves, including direct, indirect and pulse-echo configurations
JGJ/T 485-2019
Technical standard for inspection of assembled residential building
For assembled residential buildings, including ultrasonic detection of concrete defects, crack depth, and selected prefabricated concrete connection and grouting defects
ASTM C597-22
Standard Test Method for Ultrasonic Pulse Velocity Through Concrete
Defines ultrasonic pulse velocity testing through concrete using longitudinal stress-wave pulses for assessing uniformity, relative quality, cracks, voids and changes in condition
- Note: These standards are provided as technical references. Applicability depends on the testing method, equipment configuration, project requirements, and applicable local regulations.
Ultrasonic Testing Solutions for Infrastructure Inspection
Ultrasonic Testing Case StudiesUltrasonic Testing Case StudiesUltrasonic Testing Case Studies
Engineering Test Case Analysis and Technical Perspective In-depth analysis and resolution of core pain points in engineering testing...
Testing equipment experts serving global infrastructure projectsTesting equipment experts serving global infrastructure projectsTesting equipment experts serving global infrastructure projects...
FAQs About Ultrasonic Testing Equipment
Answers to common questions about equipment selection, testing methods and applications.
1. What is the main difference between UPV and Ultrasonic Tomography?
UPV (Ultrasonic Pulse Velocity) typically requires two opposite sides to measure transit time for average quality assessment. Ultrasonic Tomography uses a matrix array transducer from a single side to reconstruct high-resolution 3D images of internal defects, making it ideal for thick or single-side accessible concrete.
How Do You Ensure the Quality of Your Testing Equipment?
Finished Product Full/Spot Inspection: Each batch of products undergoes a comprehensive inspection before shipment according to international/national/industry standards (such as ASTM, EN, GB, or customer-specified standards) and more stringent internal control standards. Timely Feedback: If you discover any quality issues, please notify us immediately (preferably within 5 days of receipt) and provide clear photos/videos, a description of the problem, and the batch number. Investigation and Confirmation: We will respond and investigate promptly. If the quality issue is confirmed to be our fault (not due to shipping, improper use, or customer modification), we will provide the following solutions: Free Restocking: We will resend the defective product. Technical Support: We will provide necessary repair instructions or replacement parts.
How Do You Ensure the Quality of Your Testing Equipment?
Finished Product Full/Spot Inspection: Each batch of products undergoes a comprehensive inspection before shipment according to international/national/industry standards (such as ASTM, EN, GB, or customer-specified standards) and more stringent internal control standards. Timely Feedback: If you discover any quality issues, please notify us immediately (preferably within 5 days of receipt) and provide clear photos/videos, a description of the problem, and the batch number. Investigation and Confirmation: We will respond and investigate promptly. If the quality issue is confirmed to be our fault (not due to shipping, improper use, or customer modification), we will provide the following solutions: Free Restocking: We will resend the defective product. Technical Support: We will provide necessary repair instructions or replacement parts.
How Do You Ensure the Quality of Your Testing Equipment?
Finished Product Full/Spot Inspection: Each batch of products undergoes a comprehensive inspection before shipment according to international/national/industry standards (such as ASTM, EN, GB, or customer-specified standards) and more stringent internal control standards. Timely Feedback: If you discover any quality issues, please notify us immediately (preferably within 5 days of receipt) and provide clear photos/videos, a description of the problem, and the batch number. Investigation and Confirmation: We will respond and investigate promptly. If the quality issue is confirmed to be our fault (not due to shipping, improper use, or customer modification), we will provide the following solutions: Free Restocking: We will resend the defective product. Technical Support: We will provide necessary repair instructions or replacement parts.
How can I select the right ultrasonic NDT equipment for my project?
Share the inspection object, material, suspected defects, site conditions and required test results with our technical team. ISTINST can help assess suitable methods and available equipment configurations
Explore Complementary NDT Methods
Ultrasonic testing can be complemented by other inspection methods when different information is needed. Explore related technologies for your material, structure and inspection objective.
UT
Ultrasonic Testing
Detect internal flaws and assess structural integrity
IE
Impact Echo Testing
Concrete thickness, voids and delamination detection
GPR
GPR & Electromagnetic Testing
Rebar, utilities and subsurface structure detection
IR
Infrared Thermography
Thermal imaging for defect and moisture detection
RL
Retroreflectivity Measurement
Road marking and traffic sign retroreflectivity measurement
OM
Optical Measurement
Non-contact surface profiling and visual defect measurement
ST
Seismic & Surface-Wave Testing
Non-destructive subsurface stiffness and layer profiling
SHM
SHM & Dynamic Testing
Real-time structural health monitoring and vibration analysis
RIS
Robotic Inspection Systems
Automated stay-cable and wall-climbing robotic inspection
Explore All Testing Technologies →
Need Help Choosing the Right Ultrasonic Testing Equipment for Your Project?
Not sure which ultrasonic tester, concrete ultrasonic testing equipment, or ultrasonic tomography system is right for your project? Tell us about your testing object, required detection depth, suspected defects, and field conditions. Our technical team can recommend a suitable ultrasonic testing method and equipment configuration for concrete, bridges, tunnels, buildings, foundations, and other structural inspection applications.